Residential Drywall Installation in Gainesville, FL

Talk to a Drywall Specialist: (352) 649-3354
Large room mid-finish with taped walls in a Gainesville, FL home

Residential drywall installation in Gainesville costs $2.00 to $3.50 per square foot, hung and finished, in 2026. Homes here run from early-1900s bungalows in the Duckpond to new builds on the edge of town, so the work covers additions, new home construction, and garage conversions. Rental homes near the university also turn over often, and those updates run on the same per-foot pricing. The sidebar holds the live ranges for all services.

Residential Drywall Installation Prices

Residential Drywall Installation Specs

Taped drywall in a converted attic room of a Gainesville, FL home

How the work runs

We measure and plan the layout before any board is cut. Floors and fixtures are masked first. Then it runs hang, tape, coats, and sand, with dry time in each step, and the home stays livable while the work runs.

Common questions

Cost calculator

Pick a job and a size. The range updates from the same numbers in our cost guide.

Price ranges

Read the full cost guide

Call (352) 649-3354 for a free written quote.

Get a Free Estimate

Recent work

New tape lines over drywall joints below a coffered ceiling in a Gainesville, FL home
Crew setting a drywall ceiling panel into place in a Gainesville, FL home
Smoothing joint compound over a patched wall section in Gainesville, FL

Frequently Asked Questions

What is the per-foot price?

$2.00 to $3.50 per square foot, hung and finished to Level 4.

Do you install for additions?

Yes. Additions are a common residential job, and the new work is matched to blend with the existing structure where it connects.

Can you finish a garage conversion?

Yes. Garage conversions are scoped with insulation and moisture in mind where the space calls for it.

Do you work on rental homes?

Yes. Single-family rentals and duplexes near the university are regular work, including turnover updates between tenants.

How long does a room take?

Two to four days with dry time for most rooms.

Is the site check free?

Yes. The check and the written bid cost nothing.

What Does My Drywall Project Cost?

Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Use the calculator below for a planning range on your job.

Drywall Repair & Patch

Most single repairs land between $250 and $800. We price patches by the square foot of damaged area — roughly $55–$75 a foot — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a wet wall section cut out, dried, and replaced (a 4×8 section ran $820 flat), long seam cracks (five re-taped seams across two rooms ran $590 flat), and popcorn removal finished smooth (a 200 sq ft ceiling ran $520 flat).

New Drywall Installation

For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.05 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $845–$1,610 around Gainesville.

Room Remodel & Replacement

Tearing out old drywall and hauling it off adds $0.60–$1.20 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,160–$2,245. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.

Garage Drywall

Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.

Texture, Skim & Paint

On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.80. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,930 for texture and paint together.

What Moves the Price

  • Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
  • Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
  • Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
  • Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
  • Tear-out. Removing old drywall and disposing of it is its own line on the quote.
  • Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

Estimate Your Project

1 · Pick your project
Your estimated range

Free — no obligation. Your calculator numbers ride along with the request.

📞 (352) 649-3354