Drywall Partition Installation in Gainesville, FL
Talk to a Drywall Specialist: (352) 649-3354

Drywall partition installation in Gainesville costs $2.00 to $3.50 per square foot of new wall, framed, hung, and finished, in 2026. Turning one large room into two, splitting an open office into workspaces, or adding a wall for a home office or nursery all start the same way: a new interior partition. Partitions come up in homes and businesses alike. The sidebar holds the live ranges for all services.
Drywall Partition Installation Prices
Drywall Partition Installation Specs

How the work runs
Placement is planned with you first, since a new wall interacts with existing electrical, lighting, and HVAC in ways that are easier to handle before the wall goes up than after. Then we frame, hang, tape, and finish so the new wall reads as part of the room.
Common questions
Cost calculator
Pick a job and a size. The range updates from the same numbers in our cost guide.
Price ranges
Call (352) 649-3354 for a free written quote.
Get a Free Estimate
Recent work



Related Services
Drywall Installation · Commercial Drywall Installation · Fire-Rated Drywall Installation · Garage Drywall Installation · Metal Stud Framing · Moisture and Mold-Resistant Drywall Installation · Residential Drywall Installation · Soundproof and Acoustic Drywall Installation · Suspended Ceiling Installation
Frequently Asked Questions
What does a partition wall cost?
$2.00 to $3.50 per square foot of new wall, framed, hung, and finished.
Can a partition make a home office?
Yes. Home office and nursery partitions are common requests, with sound insulation as an option for privacy.
Do you build partitions in offices?
Yes. Dividing a leased space or an open office into separate rooms is the same project at commercial scale.
What has to be checked first?
Where the wall ties in, and what it meets: electrical, lighting, and HVAC. That is all walked through before framing starts.
Will the new wall look added-on?
It is framed and finished to match the surrounding space, so it reads as an intentional part of the room.
Is the site check free?
Yes. The check and the written bid cost nothing.
What Does My Drywall Project Cost?
Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Use the calculator below for a planning range on your job.
Drywall Repair & Patch
Most single repairs land between $250 and $800. We price patches by the square foot of damaged area — roughly $55–$75 a foot — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a wet wall section cut out, dried, and replaced (a 4×8 section ran $820 flat), long seam cracks (five re-taped seams across two rooms ran $590 flat), and popcorn removal finished smooth (a 200 sq ft ceiling ran $520 flat).
New Drywall Installation
For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.05 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $845–$1,610 around Gainesville.
Room Remodel & Replacement
Tearing out old drywall and hauling it off adds $0.60–$1.20 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,160–$2,245. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.
Garage Drywall
Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.
Texture, Skim & Paint
On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.80. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,930 for texture and paint together.
What Moves the Price
- Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
- Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
- Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
- Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
- Tear-out. Removing old drywall and disposing of it is its own line on the quote.
- Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.
Estimate Your Project
Measure the damaged section itself — length × width. A full 4×8 sheet section is 32 sq ft.
Spots done in one visit share a single minimum charge.
Price includes tearing out the old drywall and hauling it off.
Includes 5/8″ Type X fire-rated board on the wall shared with the house — and on the ceiling when there is living space above it — as code requires.
Free — no obligation. Your calculator numbers ride along with the request.
Send Your Project to Gainesville Drywall Co
Your estimate is attached automatically. Add your info and — if you can — a few photos of the project. Photos help us price the job before we ever set foot in the house. Prefer to talk? Call (352) 649-3354.