Results and Case Studies

Talk to a Drywall Specialist: (352) 649-3354
Drywall seams freshly taped in a Gainesville, FL room

Each case study below lists the work, the size, the final price, and the time on site. Representative jobs are marked as such and are replaced with verified partner jobs as they close.

Full verified case studies replace the representative slots below as partner jobs close.

Representative job: bedroom hang and finish in Gainesville

REPRESENTATIVE JOB — an example job, priced the way we price real work. A verified customer job replaces it at signing.

Service performed
Drywall Installation.
Scope of work
Hang and finish a 12 by 12 ft bedroom, walls and ceiling, Level 4.
Materials / products used
1/2-inch wall board, 5/8-inch ceiling board, paper tape.
Size
528 sq ft.
Final price
$1,484 (representative).
Cost per sq ft
$2.81 per sq ft (representative).
Turnaround / duration
3 days with dry time.
Payment terms / financing
Deposit and balance on completion, per bid.
Problem found
Bare studs after a remodel gut.
Solution delivered
Full hang, three-coat finish, sanded paint-ready.
Homeowner first name
Angela (representative).
Homeowner city / neighborhood
Gainesville, FL.
Homeowner situation (in their own terms)
Wanted the spare room back for guests.
Outcome and homeowner reaction
Room primed and ready for paint (representative).

Representative job: water damage wall section in Newberry

REPRESENTATIVE JOB — an example job, priced the way we price real work. A verified customer job replaces it at signing.

Service performed
Water Damage Repair.
Scope of work
Cut out a wet 4 by 8 ft wall section, dry the cavity, patch and texture to match.
Materials / products used
Mold-resistant board, mesh tape, orange peel texture.
Size
32 sq ft section.
Final price
$820 (representative).
Cost per sq ft
Priced per section.
Turnaround / duration
3 days with dry time.
Payment terms / financing
Due on completion, per bid.
Problem found
Soft, stained board under a slow bath leak.
Solution delivered
Wet board removed, cavity dried to a dry meter read, new board patched and matched.
Homeowner first name
Robert (representative).
Homeowner city / neighborhood
Newberry, FL.
Homeowner situation (in their own terms)
Worried the stain meant mold in the wall.
Outcome and homeowner reaction
Wall blends with the rest of the room (representative).

Representative job: popcorn ceiling removal in Alachua

REPRESENTATIVE JOB — an example job, priced the way we price real work. A verified customer job replaces it at signing.

Service performed
Popcorn Ceiling Removal.
Scope of work
Test, wet-scrape, skim, and re-finish a 200 sq ft living room ceiling smooth.
Materials / products used
Skim compound, primer.
Size
200 sq ft.
Final price
$520 (representative).
Cost per sq ft
$2.60 per sq ft (representative).
Turnaround / duration
2 days with dry time.
Payment terms / financing
Deposit and balance on completion, per bid.
Problem found
Dated popcorn texture, test came back clear.
Solution delivered
Texture removed and ceiling finished smooth, paint-ready.
Homeowner first name
Karen (representative).
Homeowner city / neighborhood
Alachua, FL.
Homeowner situation (in their own terms)
Wanted the ceiling to stop dating the room.
Outcome and homeowner reaction
Room reads ten years newer (representative).

Frequently Asked Questions

What is the unit price for new drywall?

$2.00 to $3.50 per square foot in 2026, hung and finished. Board, tape, mud, and sanding are in that range.

What adds the most cost?

Area first. Then finish level, ceiling height, and texture. Paint is priced apart in most bids.

How do I read a bid?

Each line should name the work and its price: board, hang, finish, texture. If a bid is one lump sum, ask for the lines.

What finish level do I need?

Level 4 is the norm for walls that get flat or eggshell paint. Level 5 is best under gloss paint or hard side light.

Do patches come with a firm price?

Yes, after the free check. Most patches are $250 to $900 based on size and texture work.

Which towns do you serve?

Gainesville and the towns around it — Newberry, Alachua, High Springs, Archer, Micanopy, and more. The service areas page lists every town we serve, and each town page shows its own ranges and facts.

What Does My Drywall Project Cost?

Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Use the calculator below for a planning range on your job.

Drywall Repair & Patch

Most single repairs land between $250 and $800. We price patches by the square foot of damaged area — roughly $55–$75 a foot — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a wet wall section cut out, dried, and replaced (a 4×8 section ran $820 flat), long seam cracks (five re-taped seams across two rooms ran $590 flat), and popcorn removal finished smooth (a 200 sq ft ceiling ran $520 flat).

New Drywall Installation

For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.05 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $845–$1,610 around Gainesville.

Room Remodel & Replacement

Tearing out old drywall and hauling it off adds $0.60–$1.20 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,160–$2,245. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.

Garage Drywall

Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.

Texture, Skim & Paint

On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.80. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,930 for texture and paint together.

What Moves the Price

  • Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
  • Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
  • Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
  • Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
  • Tear-out. Removing old drywall and disposing of it is its own line on the quote.
  • Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

Estimate Your Project

1 · Pick your project
Your estimated range

Free — no obligation. Your calculator numbers ride along with the request.

📞 (352) 649-3354