Moisture and Mold-Resistant Drywall Installation in Gainesville, FL

Talk to a Drywall Specialist: (352) 649-3354
Worker holding a sheet of moisture-resistant green board in Gainesville, FL

Moisture and mold-resistant drywall installation in Gainesville is priced per square foot, hung and finished, after a free check. Bathrooms, laundry rooms, and kitchens deal with moisture every day, and standard board absorbs humidity and can feed mold over time. Moisture-resistant board, often called green board or purple board depending on the product, is built for those rooms. Gainesville spends much of the year at high humidity, so the right board matters in new work and replacements alike. The sidebar holds the live ranges.

Moisture and Mold-Resistant Drywall Installation Prices

Moisture and Mold-Resistant Drywall Installation Specs

How the work runs

We name which areas of the project actually call for moisture-resistant board, and which do not, so the bid only carries the upgrade where it earns its place. Install follows the same process as any drywall job, with seams taped, finished, and sealed, since the board alone does not do the whole job.

Common questions

Cost calculator

Pick a job and a size. The range updates from the same numbers in our cost guide.

Price ranges

Read the full cost guide

Call (352) 649-3354 for a free written quote.

Get a Free Estimate

Recent work

New tape lines over drywall joints below a coffered ceiling in a Gainesville, FL home
Crew setting a drywall ceiling panel into place in a Gainesville, FL home
Smoothing joint compound over a patched wall section in Gainesville, FL

Frequently Asked Questions

Where does moisture-resistant board belong?

Bathrooms, including around tubs, showers, and sinks, plus laundry rooms and other humidity-exposed spaces.

What is green board or purple board?

Common names for moisture and mold-resistant gypsum products. The product line is named in the bid.

Does it cost more than standard board?

It is an upgrade line where it fits the room. The main installation pricing names mold-resistant board the same way: as a clear upgrade line.

Can it replace water-damaged board?

Yes, as the swap-in board where a wet room is being repaired, once the leak is fixed and the cavity is dry.

Does the board alone stop mold?

No. Properly taped, finished, and sealed seams are part of the protection, and a live leak has to be fixed first.

Is the site check free?

Yes. The check and the written bid cost nothing.

What Does My Drywall Project Cost?

Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Use the calculator below for a planning range on your job.

Drywall Repair & Patch

Most single repairs land between $250 and $800. We price patches by the square foot of damaged area — roughly $55–$75 a foot — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a wet wall section cut out, dried, and replaced (a 4×8 section ran $820 flat), long seam cracks (five re-taped seams across two rooms ran $590 flat), and popcorn removal finished smooth (a 200 sq ft ceiling ran $520 flat).

New Drywall Installation

For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.05 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $845–$1,610 around Gainesville.

Room Remodel & Replacement

Tearing out old drywall and hauling it off adds $0.60–$1.20 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,160–$2,245. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.

Garage Drywall

Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.

Texture, Skim & Paint

On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.80. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,930 for texture and paint together.

What Moves the Price

  • Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
  • Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
  • Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
  • Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
  • Tear-out. Removing old drywall and disposing of it is its own line on the quote.
  • Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

Estimate Your Project

1 · Pick your project
Your estimated range

Free — no obligation. Your calculator numbers ride along with the request.

📞 (352) 649-3354