Drywall Taping and Mudding in Gainesville, FL
Talk to a Drywall Specialist: (352) 649-3354

Drywall taping and mudding in Gainesville runs $1.00 to $2.00 per square foot in 2026, depending on finish level. This page covers taping and mudding as its own job: finishing board another crew hung, or re-taping seams that cracked or failed. Failed seams often mean pulling the old tape and compound before we start fresh, which takes longer than taping a clean new install. Level 4 is the base finish. If your board is already taped and the question is the finish level — Level 4 or a Level 5 skim coat — go to Drywall Finishing. Check the sidebar for live pricing on all our services.
Drywall Taping and Mudding Prices
Drywall Taping and Mudding Specs

How the work runs
We assess the hung board in person first, checking fastening and seam condition. Tape is embedded in the first coat across all seams and corners. Each added coat feathers wider than the last, with proper dry time between coats, and the seams get a final walkthrough before the job wraps.
Common questions
Cost calculator
Pick a job and a size. The range updates from the same numbers in our cost guide.
Price ranges
Call (352) 649-3354 for a free written quote.
Get a Free Estimate
Recent work



Related Services
Drywall Finishing · Why Drywall Seams Show Through Paint · Popcorn Ceiling Removal · Drywall Painting and Finishing · Popcorn Ceiling Removal · Texture Matching
Frequently Asked Questions
What is the per-foot price?
$1.00 to $2.00 per square foot based on finish level.
Can you finish board someone else hung?
Yes, as long as the board is properly fastened. We check the hang first.
Why did my seams crack?
Rushed dry time between coats and poor tape embedding are common causes. We assess the cause before re-taping so the same issue does not come back.
Paper tape or mesh tape?
Paper tape is generally used for flat seams and bonds strong when embedded right. Mesh is self-adhesive and fits specific applications. The seam type decides.
How many coats does a seam need?
At least three, each wider than the last, for a smooth, invisible transition at Level 4.
Is the site check free?
Yes. The check and the written bid cost nothing.
What Does My Drywall Project Cost?
Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Use the calculator below for a planning range on your job.
Drywall Repair & Patch
Most single repairs land between $250 and $800. We price patches by the square foot of damaged area — roughly $55–$75 a foot — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a wet wall section cut out, dried, and replaced (a 4×8 section ran $820 flat), long seam cracks (five re-taped seams across two rooms ran $590 flat), and popcorn removal finished smooth (a 200 sq ft ceiling ran $520 flat).
New Drywall Installation
For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.05 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $845–$1,610 around Gainesville.
Room Remodel & Replacement
Tearing out old drywall and hauling it off adds $0.60–$1.20 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,160–$2,245. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.
Garage Drywall
Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.
Texture, Skim & Paint
On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.80. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,930 for texture and paint together.
What Moves the Price
- Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
- Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
- Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
- Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
- Tear-out. Removing old drywall and disposing of it is its own line on the quote.
- Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.
Estimate Your Project
Measure the damaged section itself — length × width. A full 4×8 sheet section is 32 sq ft.
Spots done in one visit share a single minimum charge.
Price includes tearing out the old drywall and hauling it off.
Includes 5/8″ Type X fire-rated board on the wall shared with the house — and on the ceiling when there is living space above it — as code requires.
Free — no obligation. Your calculator numbers ride along with the request.
Send Your Project to Gainesville Drywall Co
Your estimate is attached automatically. Add your info and — if you can — a few photos of the project. Photos help us price the job before we ever set foot in the house. Prefer to talk? Call (352) 649-3354.